Corrective Measures for ‘NTLDR Missing’ BSOD: An Expert Walkthrough

This issue applies to the Windows XP operating system, including the Professional and Home Edition versions. Beginning inWindows Vista , Windows utilizesBOOTMGR , not NTLDR. If you receive an “NTLDR is missing” error inWindows 11 , Windows 10 , etc., especially early in the installation process, trystarting the clean install process over again from scratch.

With Screensaver Wonder you can easily make a screensaver from your own pictures and video files. Create screensavers for your own computer or create standalone, self-installing screensavers for easy sharing with your friends. Together with its sister product Screensaver Factory, Screensaver Wonder is one of the most popular screensaver software products in the world, helping thousands of users decorate their computer screens quickly and easily.

How to Fix ‘NTLDR Is Missing’ Errors

Follow these steps in the order they’re given below to try the simpler solutions first.

1. Restart your computer . The error could be a fluke.
2. Check your floppy and optical (CD/DVD/BD) drives for media and disconnect anyexternal drives . Often times, the “NTLDR is missing” error will appear if your computer is trying to boot to a non-bootable floppy disk, CD/DVD/BD, external hard drive, or flash drive.
   If you find that this is the cause of your problem and it’s happening a lot, considerchanging the boot order in BIOS so the hard drive with Windows installed is listed first.
3. Check the hard drive and other drive settings in BIOS to ensure they’re correct. The BIOS configuration tells the computer how to use a drive, so incorrect settings can cause problems, including these errors.
   BIOS usually has an “Auto” setting for the hard drive and optical drive configurations, which is a safe bet if you’re not sure what to do.
4. Restore the NTLDR and ntdetect.com files from the Windows XP CD . Restoring these two important system files may do the trick.
5. Repair or replace the boot.ini file . This will prevent the NTLDR error if the cause of the problem is a boot.ini file that isn’t configured properly for your Windows installation.
6. Write a new partition boot sector to the Windows XP system partition . If thepartition boot sector has become corrupt or isn’t properly configured, you might receive the error.
7. Repair the Windows XP master boot record . NTLDR error messages may also appear if themaster boot record is corrupt.
8. Reseat all internal data and power cables . The error messages could be caused by loose or malfunctioning IDE cables.
   Try replacing the cable if you suspect it might be faulty.
9. Update your motherboard’s BIOS . Occasionally, an outdated BIOS version can cause the error.
10. Perform a repair installation of Windows XP . This_should_ replace any missing or corrupt files, but continue troubleshooting if this doesn’t resolve the issue.
11. Perform a clean installation of Windows XP . This will completely remove Windows from your computer and install it again from scratch.
    While this will almost certainly resolve any NTLDR errors, it’s a time-consuming process due to the fact that all of your data must be backed up and then later restored. If you can’t gain access to your files to back them up, you will lose them all if you continue with a clean installation.
12. Replace the hard drive and then perform a new installation of Windows. If all else has failed, including the clean installation from the last step, you’re most likely facing ahardware issue with your hard drive.
    Windows XP is very outdated. To receive up-to-date security patches, it’s recommended that youinstall a modern version of Windows .

Caused of NTLDR Errors

Epubor Audible Converter for Mac： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

There are a few ways the error may present itself, with this first one being the most common:

• NTLDR is missing
• Press any key to restart
• NTLDR is missing
• Press Ctrl Alt Del to restart
• Boot: Couldn’t find NTLDR
• Please insert another disk

The error message displays very shortly after the computer is first started, immediately after thePower On Self Test (POST) is complete, when Windows has only initially begun to load.

There are a number of possible causes forNTLDR errors, including the most common “NTLDR is missing” issue.

The prevailing reason is when your computer is trying toboot from a hard drive or flash drive that isn’t properly configured to be booted from. In other words, it’s trying to boot from a_non-bootable_ source. This also would apply to media on an optical drive or floppy drive that you’re trying to boot from.

Other possible causes include corrupt and misconfigured files, hard drive andoperating system upgrade issues, corrupt hard drivesectors , an outdatedBIOS , and damaged or looseIDE cables .

Was this page helpful?

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Subscribe

Tell us why!

Other Not enough details Hard to understand

Submit