Seamless Setup: How to Pair Your Samsung Soundbar with the TV
Disclaimer: This post includes affiliate links
If you click on a link and make a purchase, I may receive a commission at no extra cost to you.
Solve Common Issues by Learning How to Factory Reset Your Samsung TV Model
What to Know
- Total Reset: Go toSettings >General >Reset > enter0000 >Reset >OK . Network settings aren’t affected.
- Picture or Sound Reset:Settings >picture orsound icon >Expert Settings >Reset Picture orReset Sound .
- Smart Hub Reset:Settings >Support >Device Care >Self Diagnosis >Reset Smart Hub .
This article explains how to reset Samsung TVs’ picture, sound, SmartHub, and network connection settings. Also included are instructions for a total reset, reset via Remote Management, and reset non-smart Samsung TVs.
How to Fix Vertical Lines on a Samsung TV
Reset Picture Settings
To reset the picture, selectSettings >picture icon >Expert Settings >Reset Picture . Confirm by selectingYes .
This option resets your color, brightness, contrast, and other picture-related settings to the factory defaults. This comes in handy if you’ve made manual adjustments to the picture but don’t like the result and can’t get the settings back to where you started. A picture settings reset does not change any other TV settings.
Reset Sound Settings
To reset the sound settings, selectSettings >sound icon >Expert Settings >Reset Sound . SelectYes to confirm.
This option resets your sound-related settings such as Balance, Equalizer adjustments, TV installation type (wall/stand), HDMI audio format,Audio delay , and Auto Volume back to the factory defaults.
As with picture settings, if you’ve manually adjusted the sound settings but don’t like the result, the Reset Sound option will take you back to the TV’s original sound settings. Resetting the sound settings does not change any other TV settings.
How to Turn Off Voice Guide on a Samsung TV
Reset the Smart Hub and Samsung Account Settings
To reset the Smart Hub settings, go toSettings >Support >Device Care >Self Diagnosis >Reset Smart Hub . If you’re asked for a PIN, the default value is0000 .
A Smart Hub reset returns those settings to their factory defaults and deletes all information about your Samsung account. After a Smart Hub Reset, you must relink your account to any services and re-establish Smart Hub service agreements.
Although pre-loaded streaming apps are retained, any apps you’ve previously added to your My Apps viewing selection must be downloaded and installed again.
Total Reset
To perform a total reset, go toSettings >General >Reset > enter0000 >Reset >OK .
If your TV doesn’t have those menus, try one of these paths instead:
- Settings >Support >Self Diagnosis >Reset
- Settings >All Settings >General & Privacy >Reset .
The most comprehensive reset option you can do is a total reset of the TV. When initiated, all picture, sound, Smart Hub, and other operational features, such as any broadcast channels saved, are reset to default settings. Network settings are not affected by a total reset.
Unplugging the TV from power does not reset it, it just turns it off. If you plug the TV back in it will restart as if you turned it off and on via the remote. A reset is done via the settings.
Reset Network Connection
You can reset the network settings on some Samsung TVs viaSettings >All Settings >Connections >Network >Reset Network . To confirm, pressReset .
How to Avoid Buffering Issues When Streaming Video
If there seems to beno internet connection on your TV, you can perform a test to identify the issue. Go to Settings > General > Network > Network Status to do that. There’s a problem if you see anX between the TV and router or between the router and the internet.
If you can’t establish a stable connection using the provided methods, contact yourinternet service provider before reaching out to Samsung.
Reset TV via Remote Management
In addition to the options you have to reset your TV, you can also have Samsung check your TV and perform all reset functions remotely. In other words, have Samsung take control of your TV.
This option only works with Samsung Smart TVs connected to the internet.
- Contact a Samsung Care Pro and ask about Remote Service (it’s free). Make sure you have the model, serial number, and, if possible, the TV software version ready. The agent will also ask you additional questions about the possible problem.
- Open theSupport menu on your TV and selectRemote Management .
- Read the service agreements and enter yourSamsung Account PIN Number . If you don’t have a PIN, enter 0s.
- Once the Samsung service agent is able to take control of your TV, they will do one or more of the following:
- Diagnose the TV.
- Adjust the TV’s picture, sound, and/or smart hub settings.
- Initiate a Factory Reset.
- Install any needed software/firmware updates.
- Provide any further guidance on whether onsite or carry-in service is required.
Reset Options for Non-Smart Samsung TVs
If you have a non-smart TV or an older pre-smart Samsung TV, you can reset the picture and sound settings through a similar on-screen menu as a Smart TV, but there’s no Smart Hub or Remote Management option as the TV doesn’t have internet capabilities.
If a total software reset option is provided, the TV will roll back the picture and sound settings, channel menu settings, clock and timer settings, and other settings the user may have changed. Depending on the model year, the on-screen menu layout may vary, so if you’re unsure how to access the reset options, consult the user guide for your specific Samsung TV.
The Bottom Line
The reset options Samsung provides for its TVs may be necessary to get everything working again. However, before you initiate any reset yourself or take advantage of the Remote Management option, check the following:
- Make sure physical connections are correct and firmly attached.
- If you have a smart TV, check your internet connection.
- Update the Samsung smart TV if an update is available.
- If your TV isn’t responding to your remote, replace the batteries and see if it works again with your TV.
Was this page helpful?
Thanks for letting us know!
Get the Latest Tech News Delivered Every Day
Tell us why!
Other Not enough details Hard to understand
Submit
Also read:
- [New] Most Favored 5 iPhones Podcast Apps
- [Updated] 2024 Approved Getting Into Film Editing Made Easy
- Comprehensive Instructions for Disabling Microsoft Edge News Widget in Windows 11
- Diverse Halloween Festivities Explored
- Effortless Communication with Meta Quest's Microphone - How and Why
- Elite Cinematic Promo Reels
- Finding Your Way Back to That Mysterious, Hidden Phone Line
- Getting Back in Action: Troubleshooting Guide for Stuck or Frozen Minecraft on Desktop Computers
- Handling iPhone Email Problems? Here's What You Need to Know
- How to Fix It Infinix Zero 5G 2023 Turbo Wont Turn On | Dr.fone
- In 2024, FRP Hijacker by Hagard Download and Bypass your Tecno FRP Locks
- Independent Messaging: How to Chat on Messenger Outside of Facebook
- Inside the Next-Gen Google Pixel Fold 2 – Projected Pricing, Release Forecast & Speculative Specifications
- Personalizing Gmail Alerts: Guide to Changing Notification Tones
- Quickly Repair Damaged PDF v1.4 Files
- Still Using Pattern Locks with Realme GT 3? Tips, Tricks and Helpful Advice
- Troubleshooting Text Message Issues: A Guide for Android Users
- Title: Seamless Setup: How to Pair Your Samsung Soundbar with the TV
- Author: Andrew
- Created at : 2024-09-23 01:09:29
- Updated at : 2024-09-27 00:53:36
- Link: https://tech-renaissance.techidaily.com/seamless-setup-how-to-pair-your-samsung-soundbar-with-the-tv/
- License: This work is licensed under CC BY-NC-SA 4.0.